Round Hot Tub Cover Lift
round hot tub cover lift This round hot tub cover lift is so far the most hot-seller and affordable model in the markets. It is made of Aluminum Alloy with black coating, which is rust-proof and super stable. It looks small and simple, but it can support the heaviest weight and needs least...
round hot tub cover lift
This round hot tub cover lift is so far the most hot-seller and affordable model in the markets. It is made of Aluminum Alloy with black coating, which is rust-proof and super stable. It looks small and simple, but it can support the heaviest weight and needs least clearance behind only as 10 inch.
round hot tub cover lifter
Print outdoor metal powder
Help lifting up the cover
Needs the least clearance
Easy to conduct
Lighter but support heavier weight
Triangle Master Carton
Features of round hot tub cover TS-07
1. Made of Aluminum Alloy material. Light, stable, rust-proof, durable.
2. Requires as little clearance.
3. Suitable for rectangular and square spas of maximum size 250CM.
4. With a warranty
Composing Parts of the round hot tub cover TS-07
1-2 x Mounting Brackets
2-2 x Pivot Arms
3-2 x Support Arms + 1x Center Coupler
4-38 x Large/Small Black Dome Cap
5-4 x Bushing
6-2 x Hex Cap Bolt + 4xFlat Washer + 2xNylon Lock nut
7-24 x Mounting Screws
8-12 x Self-tapping screws
Three Simple Installation Steps of the round hot tub cover TS-07
Connect the Pivot Arm and two Bushings to the Mounting Brackets, using one Hex Cap Bolt, two Flat Washers, and one Nylon Locknut, press the decorative Large Black Dome Caps over the heads of the Hex Cap Bolts, as shown in the below picture. Then attach the Mounting Brackets to the left and right sides of the spa with the Mounting Screws.
Note: If necessary, slide the Wrench behind the Mounting Bracket to tighten the Nylon Locknut.
Insert the Support Arms into the Center Coupler Piece. Then join the Support Arms Section into the Pivot Arms.
Lay the Cover Lift on the spa cover. Position①, using the Self Tapping Screws to fasten the Support Arms and Coupler Piece together. Position②, using the Self Tapping Screws to fasten the Support Arms to the Pivot Arms. Then press the decorative Small Black Dome Caps over the heads of all the exposed screws.
Delivery Package of TS-07 round hot tub cover
1. Does this include the hot tub cover or just the lift?
Just the lift.
2. What is the max height of the tub?
Up to 38” tall
3. Will it fit on any spa?
It is adjustable and so any normal size spa would probably work.
4. What are the back and side clearance requirements?
Aprox 9" to 10" Depending on the thickness of your cover
5. What is the max cover weight for this?
A normal cover brand new weighs about 65 to 70lbs, it would have no problem supporting that and even heavier.